What is the best way to prolong the life of the unused product in the tube?
After use, remove air in the tube by squeezing product slightly past end of the opening, then tightly recap. Dried product can easily be removed.
What materials can E6000 PLUS be used on?
Use on all your INDOOR / OUTDOOR DIY or craft projects requiring a permanent bond. EXCELLENT ADHESION TO: Wood, Glass, Fabric, Ceramic, Gems, Metals, Marble, Fiberglass, Concrete, most Plastics, Lexan, Plexiglass & much more!
What is the best way to clean-up E6000 PLUS?
Clean uncured adhesive with rubbing alcohol, mineral spirits, acetone or a dry cloth. Cured material may be removed with mineral spirits or by cutting or scraping.
Can E6000 PLUS be sanded?
Yes. E6000 PLUS sands easily. The cured adhesive sands off at different rates depending on grit of sandpaper. Carefully cut away as much excess cured adhesive as possible; and then use coarse grit sandpaper (60 or 80) to remove any remaining unwanted material. A finer grit (over 200) can be used for finish work.