Shop Rhinestone Supply

#1 Rhinestone & Component Supplier
  1. Home
  2. GLUES
  3. E6000® SPRAY ADHESIVE 4 ounce bottle

E6000® SPRAY ADHESIVE 4 ounce bottle

  Enlarge  

E6000® SPRAY ADHESIVE 4 ounce bottle

Discounts Apply !
Additional 10% Discount applied at check out on all SALE Items

E6000 Spray Adhesive (4 ounce bottle) is a permanent, multi-purpose latex-based adhesive without the toxic smells, fumes or unhealthy side effects. It is strong, flexible, water-resistant, resists bleed-through and yellowing. Ideal for a many substrates such as paper, wood, cardboard, photos, medium to heavy weight fabrics, glass, metals and more.The easy-to-use pump sprays a fine, even mist that is solvent and propellant free.

  • Low odor
  • Easy water clean-up
  • Non-flammable 
  • Water resistant
  • Latex formula contains no VOCs, harsh chemicals or propellants 
  • Photo safe 
  • Dries translucent 
  • Indoor/Outdoor

  • INSTRUCTIONS

  • Follow these step-by-step directions when using E6000 Spray Adhesive:

    1. Read all directions before using.
    2. Shake vigorously before use.
    3. Protect surrounding area from overspray.
    4. Point spray tip away from face.
    5. Hold bottle 8-10 inches away from surface.
    6. PAPER, PHOTOS, CARDBOARD & FOIL: Spray a thin, light coat to one surface. Join materials and continue to apply pressure periodically making sure to secure corners. Allow to dry 1-3 minutes.
    7. POROUS MATERIALS (including foams and Styrofoam: Spray a heavy coat to both surfaces to be joined. Mate surfaces together. Allow to dry.*
    8. NON-POROUS MATERIALS: Spray a light coat to one surface. Mate surfaces together. Allow to dry.*
    9. IMPORTANT – CLEAN AFTER EACH USE: To prevent clogging, remove and rinse nozzle/straw. Pump warm tap water through sprayer until all adhesive is cleared out. Then dry, replace in the bottle, secure cap. *Maximum strength may not be reached for 1-5 hours. Styrofoam may require an overnight cure.
Price: $8.99
Quantity:
« Previous | Next »